AWEA MECHANTRONIC

MVP-xx40 Bridge Type Moving Cross Raill 5-Face Machining Center:

Models MVP-4040 MVP-5040 MVP-6040 MVP-7040 MVP-8040
X-axis travel 4,000 mm 5,000 mm 6,000 mm 7,000 mm 8,000 mm
Y-axis travel 4,000 mm
Z-axis travel 1,000 mm ( Opt. 1,200 / 1,400 mm )
W-axis travel 1,250 mm
Dist. between columns 3,500 mm
Spindle nose to table top 200 ~ 2,450 mm
TABLE
Table size ( X x Y ) 4,020 x 3,010
mm
5,020 x 3,010
mm
6,020 x 3,010
mm
7,020 x 3,010
mm
8,040 x 3,010
mm
Table load capacity 15,000 kg 18,000 kg 20,000 kg 25,000 kg
SPINDLE
Max. spindle speed V : 10 ~ 4,000 rpm   ;   H : 20 ~ 3,000 rpm
Spindle motor output
( cont. / 30 min. )
22 / 26 kW ( 30 / 35 HP )
Spindle Taper BT 50
TOOL MAGAZINE
Tool magazine capacity 60 T
Max. tool diameter / adjacent Ø 127 / Ø 215 mm
Max. tool length 400 mm
Max. tool weight 20 kg
ACCURACY
Positioning accuracy ( JIS B 6338 ) ± 0.010 mm / Full Travel
Positioning accuracy ( VDI 3441 ) P = 0.025 mm /
Full Travel
P = 0.030 mm /
Full Travel
P = 0.035 mm /
Full Travel
P = 0.040 mm / Full Travel
Repeatability ( JIS B 6338 ) ± 0.003 mm
Repeatability ( VDI 3441 ) P = 0.018 mm P = 0.022 mm P = 0.026 mm P = 0.030 mm
FEED RATE
X-axis repids 15 m/min. 10 m/min. 7.5 m/min. 20 m/min.
Y-axis rapids 10 m/min.
Z-axis rapids 10 m/min.
W-axis rapids 3 m/min.
Cutting feedrate 5 m/min.
GENERAL
Power Requirement AC 220 + 10% 3 phase / 80 KVA
Pneumatic pressure requirement 5 ~ 8 kg / cm²
Hydraulic unit tank capacity 290 L
Lubrication oil tank capacity 6 L
Coolant tank capacity 1,200 L
Machine weight 78,500 kg 83,500 kg 88,500 kg 93,500 kg 122,000 kg

Specifications are subject to change without notice.

[x]