| AH Series |
|---|
| CAPACITY | AH-500 | AH-630 | ||
|---|---|---|---|---|
| X-axis travel | 780 mm | 1,020 mm | ||
| Y-axis travel | 670 mm | 900 mm | ||
| Z-axis travel | 650 mm | 900 mm | ||
| Dist. from spindle center to table top | 90 ~ 760 mm | 50 ~ 950 mm | ||
| Dist. from spindle nose to table center | 150 ~ 800 mm | 200 ~ 1,100 mm | ||
| WORKING TABLE | ||||
| Table size | 500 x 500 mm | 630 x 630 mm | ||
| Min. table index ( B-axis ) | 0.001° | 1° | 0.001° | 1° |
| Max. work-piece diameter / height | Ø 700 / 800 mm | Ø 1,020 / 1,000 mm | ||
| Table load capacity | 500 kg | 1,200 kg | ||
| SPINDLE | ||||
| Spindle motor ( cont. / 30 min. ) | 22 / 26 kW | |||
| Spindle speed | Direct Drive 10,000 rpm |
Gear 6,000 rpm | Direct Drive 10,000 rpm |
Gear 6,000 rpm |
| Spindle taper | BBT50 | |||
| Feed rate | ||||
| X-axis rapid feed rate | 60 m/min. | 48 m/min. | ||
| Y-axis rapid feed rate | 48 m/min. | 36 m/min. | ||
| Z-axis rapid feed rate | 60 m/min. | 48 m/min. | ||
| B-axis rapid feed rate | 11.1 rpm | |||
| Cutting feed rate | 1 ~ 10 m/min. | |||
| TOOL MAGAZINE | ||||
| Tool magazine capacity | 60 T | |||
| Max. tool length | 400 mm | 500 mm | ||
| Max. tool weight | 20 kg | |||
| Max. tool diameter / adj. pocket empty | Ø 115 / Ø 230 mm | |||
| ACCURACY | ||||
| Positioning accuracy ( VDI 3441 ) | P ≤ 0.010 mm / Full travel | |||
| Repeatability ( VDI 3441 ) | Ps ≤ 0.008 mm | |||
| GENERAL | ||||
| Control system | FANUC Oi-MD | |||
| Pneumatic pressure requirement | 6 kg / cm² | |||
| Machine dimension ( L x W x H ) | 4,600 x 3,035 x 3,745 mm | 5,325 x 3,485 x 3,755 mm | ||
| Machine weight | 12,000 kg | 16,500 kg | ||
Specifications are subject to change without notice.
Top