AWEA MECHANTRONIC

SP Series Bridge Type Vertical Machining Center :

列印此頁面 SP-2016 SP-3016 SP-4016
CAPACITY
X-axis travel 2,100 mm 3,060 mm 4,000 mm
Y-axis travel 1,600 mm
Z-axis travel 760 mm
Dist. form spindle nose to table top 200 ~ 960 mm
Dist. between columns 1,700 mm
WORKING TABLE
Table size ( X direction ) 2,310 mm 3,260 mm 4,200 mm
Table size ( Y direction ) 1,500 mm
Table load capacity 8,000 kg 10,000 kg 12,000 kg
SPINDLE
Spindle motor ( cont. / 30 min. ) 22 / 26 kW ( 30 / 35 HP )
Spindle speed 6,000 rpm
Spindle taper BT50 ( ISO50 ) / DIN69871-A ( Opt. )
FEED RATE
X-axis rapid feedrate 20,000 mm/min. 20,000 mm/min. 15,000 mm/min.
Y-axis rapid feedrate 20,000 mm/min.
Z-axis rapid feedrate 15,000 mm/min.
Cutting feedrate 1 ~ 10,000 mm/min.
TOOL MAGAZINE
Tool magazine capacity 32 ( 24 / 40 / 60 Opt. )
Max. tool diameter / adj. pocket empty Ø 127 / 215 mm
Max. tool length ( from gauge line ) 400 mm
Max. tool weight 20 kg
ACCURACY
Positioning accuracy ( JIS B 6338 ) ± 0.015 mm / Full Travel
Positioning accuracy ( VDI 3441 ) P ≤ 0.020 mm / Full Travel P ≤ 0.025 mm / Full Travel P ≤ 0.030 mm / Full Travel
Repeatability ( JIS B 6338 ) ± 0.003 mm
Repeatability ( VDI 3441 ) Ps ≤ 0.015 mm Ps ≤ 0.020 mm Ps ≤ 0.025 mm
GENERAL
Power requirement 220 ± 10 %
Pneumatic pressure requirement ( min. ) 5 ~ 8 kg / cm²
Hydraulic unit tank capacity ( pump ) 120 liter ( 7.5 HP )
Lubrication oil tank capacity 6 liter
Coolant tank capacity ( pump ) 420 liter ( 1 HP )
Machine weight 19,000 kg 23,500 kg 28,000 kg

Specifications are subject to change without notice.