AWEA MECHANTRONIC

VP Series
CAPACITY VP-1612 VP-2012 VP-3012 VP-4012 VP-5012 VP-6012
X-axis travel 1,600 mm 2,000 mm 3,000 mm 4,000 mm 5,000 mm 6,000 mm
Y-axis travel 1,200 mm
Z-axis travel 760 mm
Dist. from spindle nose
to table top
200 ~ 960 ( #50 gear spindle )*1 200 ~ 960
( #50 direct
drive spindle )
Distance between columns 1,300 mm
WORKING TABLE
Table size ( X direction ) 1,600 mm 2,000 mm 3,000 mm 4,000 mm 5,000 mm 6,000 mm
Table size ( Y direction ) 1,100 mm
Table load capacity 3,000 kg 3,500 kg 4,500 kg 6,000 kg 8,000 kg 5,000 kg
SPINDLE
Spindle power
( cont. / 30 min. )
11 / 15 kW 22 / 26 kW
Spindle speed Gear Spindle 6,000 rpm Direct drive
spindle
10,000 rpm
Spindle taper BT50 / BBT50 ( Opt. ) BBT50
FEED RATE
X-axis rapid feed rate 24 m/min. 20 m/min. 10 m/min. 8 m/min. 40 m/min.
Y-axis rapid feed rate 24 m/min.
Z-axis rapid feed rate 20 m/min.
Cutting feed rate 12 m/min. 10 m/min. 8 m/min. 12 m/min.
TOOL MAGAZINE
Tool magazine capacity 32 T ( Opt. 24 / 40 T )
Max. tool diameter
/ adj. pocket empty
Ø 125 / Ø 229 mm
Max. tool length
( from gauge line )
350 mm
Max. tool weight 15 kg
ACCURACY
Positioning
accuracy
( ISO230-2 )
X-axis mm A ≤ 0.012 A ≤ 0.016 A ≤ 0.02 A ≤ 0.026 A ≤ 0.032
Y / Z axes mm A ≤ 0.012
Repeatability
( ISO230-2 )
X-axis mm R ≤ 0.008 R ≤ 0.012 R ≤ 0.014 R ≤ 0.02 R ≤ 0.026
Y / Z axes mm R ≤ 0.010
GENERAL
Coolant tank capacity
( pump )
465 liter ( 1.5 HP )
Lubrication oil tank
capacity
4.6 liter
Hydraulic unit tank capacity
( pump )
8 liter ( 2 HP )
Pneumatic pressure
requirement ( min. )
5 ~ 7 kg/cm²
Power requirement AC 220 ± 10 % 3 , 60 / 50 Hz / 40 kVA
Machine weight 14,000 kg 16,000 kg 20,000 kg 24,000 kg 28,000 kg 35,000 kg

Specifications are subject to change without notice.