
AF-Ⅱ Series |
---|
Models | AF-650Ⅱ | AF-800Ⅱ | AF-1000 |
---|---|---|---|
X-axis travel | 650 mm | 800 mm | 1,020 mm |
Y-axis travel | 510 mm | 550 mm | |
Z-axis travel | 510 mm | 635 mm | |
Distance from spindle center to column |
552 mm | 588 mm | |
Distance from spindle nose to table top |
100 ~ 610 mm | 100 ~ 735 mm | |
TABLE | |||
Table size ( X direction ) | 750 mm | 860 mm | 1,200 mm |
Table size ( Y direction ) | 510 mm | 550 mm | |
Table load capacity | 500 kg | 700 kg | |
T slot ( Width x Pitch x No. ) | 14 mm x 100 mm x 4 | 18 mm x 100 mm x 5 | |
SPINDLE | |||
Spindle taper | BT40 | ||
Spindle motor ( cont. / 30 min. ) | 11 / 15 kW | ||
Spindle speed | Direct-drive 12,000 rpm | ||
FEED RATE | |||
X / Y axes rapid feed rate | 48 m/min. | 36 m/min. | |
Z-axis rapid feed rate | 32 m/min. | 24 m/min. | |
Cutting feed rate | 15 m/min. | ||
TOOL MAGAZINE | |||
Tool magazine capacity | 24 T | 30 T | |
Max. tool length | 250 mm | ||
Max. tool weight | 7 kg | ||
Max. tool diameter / adj. pocket empty | Ø 75 / Ø 150 | ||
ACCURACY | |||
Positioning accuracy ( ISO230-2 ) | 0.006 mm | ||
Repeatability ( ISO230-2 ) | 0.005 mm | ||
GENERAL | |||
Control system | FANUC Oi - MF PLUS | ||
Pneumatic pressure requirement | 6 kg / cm² | ||
Power requirement | 25 kVA | 30 kVA | |
Coolant tank capacity | 270 liter | 360 liter | |
Machine weight | 4,200 kg | 5,000 kg | 7,000 kg |
Specifications are subject to change without notice.